applied load

With increasing the applied load and sliding velocity, the friction coefficients decrease.

随着载荷和摩擦速度的增加，摩擦系数减小。

When the applied load increased, because larger size SiC particles mashed, the load carrying capacity decreased, which lead to delamination wear occurring.

随着载荷的增加，由于大粒度SiC颗粒易于破碎，承载作用下降，导致剥层磨损的发生。

The coating layer hardness depends not only on the coating material, but also on the applied load and coating layer thickness.

涂层硬度不仅取决于涂层材料本身，同时还与试验负荷和膜层的厚度密切相关。

The fracture mechanism of PVC under applied load and the cause of' stress relaxation under high speed tension load are discussed.

探讨了PVC在外加载荷作用下的断裂过程和高速拉伸的应力松驰现象的产生机制。

Compression is the opposite of tension with respect to the direction of the applied load.

压力是张力的反方向外加负载.

Compared to the cross-section, the surface of the coatings had better ability to resist applied load and better elastic recovery after unloading.

涂层表面比断面具有更为优良的抵抗外加负载和卸载后良好的弹性恢复的能力。

Elastic recovery means that when the applied load is released, the piece returns to its original shape. test method to prove the resistance to initial ring deflection

弹性回复是指当样品所受应力撤销后，其完全回复到初始形状的现象。检验初始环状变形可能性的方法

In terms of geometry, the defining parameters are the body width, hole diameter and the location of the applied load.

在条款几何，确定参数是身体的宽度项，孔直径和地点应用负载性。

The relationship between the applied load and the displacement is evaluated with controlling displacement increment method.

通过控制位移增量法得到了加载过程中载荷和位移之间的关系曲线.

A frost heave model based on moisture temperature and applied load interaction in frozen soil

基于冻土水分温度和外荷载相互作用的冻胀模式

The question on power revisal and suddenly applied load of charged diesel of generating set with internal combustion engine

内燃发电机组增压柴油机的功率修正和突加负载问题

Secondly it is necessary to define the applied load.

其次,需要确定所作用的载荷.

Moreover, the applied load and sliding cycles directly determine the wear property of the Si ( 100).

此外，外加载荷和扫描循环次数直接决定Si（100）表面的耐磨性能。

By increasing gradually the applied load, the damage propagation and the ultimate strength are obtained.

层合板的破坏扩展及极限强度通过逐渐增加载荷迭代求得。

Analysis of Applied load and Displacement of More Than One Span Steel Structure of Portal Frames With and Without Hinges

多跨无铰与有铰钢结构门式框架承载力及位移的对比分析

Thermal Transient Behavior of Thrust Bearing under Step Applied Load

阶跃载荷扰动条件下推力轴承热瞬态过程研究

Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.

塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。

The simulation results show multicast routing algorithms have shorter average latency and higher throughput and balanced applied load compared with unicast routing algorithms.

通过模拟实验表明，多播较单播通信具有更小的平均传输延时和更高的网络吞吐量，且负载分配均匀；

The Influence of the Applied Load on Shape Recover and Phase Transformation in a Ti-Ni Alloy

附加载荷对Ti-Ni合金形状恢复及相变的影响

Elastic deformation is nonpermanent, which means that when the applied load is released, the piece returns to its original shape.

弹性形变是非永久性的，即撤去加载后，样品可恢复初始的形状。

The linearity between the electrical resistance change and the applied load was good for the carbon fiber reinforced cement based material.

碳纤维水泥基材料的电阻变化与所受荷载呈良好的线形关系；

The friction and wear behaviors of the PFW/ PU coatings filled MoS_2 and graphite are dependent on the applied load.

同时，负荷和速度对添加MoS2与石墨的聚四氟蜡/聚氨酯复合涂层的摩擦磨损性能有很大影响。

The applied load and deformation displacement are quite small due to the decrease in the material dimension. That gives rise to big difficulties in the experimental measurement.

由于材料尺度的减小，材料所受的外加载荷与变形位移非常小，从而给实验测量带来了很大的困难。

This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.

该公式为应力断料时的预荷力计算提供了理论依据。

The indenter, which has a finite elastic modulus , also undergoes elastic deformation under the applied load.

压头也具有一定的弹性模数, 所以在加载的时候它自身也要承受弹性变形.

Application of sudden applied load method in blast simulation

突加载荷法在模拟爆破中的应用

Experimental Achievement of Applied Load, Confirmation of Compressive Modulus Index of Subgrade Soil by Reversed Deduction Method

应用静载荷试验成果反演地基土压缩模量指标

The result shows that the optimal value of filler metal thickness exists and the residual stress decreases with the applied load increasing.

结果表明，钎缝厚度存在最佳值，在一定范围内钎焊压力增大，残余应力减小。

Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.

弹性变形是材料变形部分在去除载荷后可以恢复到原来的形状。

Then the dynamic responses of the plate subjected to suddenly applied load and harmonious load are analyzed.

对弹性半空间上方板在突加荷载及谐和荷载作用下的动力响应进行了时程分析。